Lionel Legacy Videos

To accompany the Lionel Legacy review in the May 2008 issue, staff members Robert Keller and Kent Johnson filmed several how-to videos to demonstrate its features.

Published: January 22, 2010

Kent Johnson's Legacy Tip #1

Just as I've done for other products reviewed in CTT, I put the Legacy system into service on my 14 x 48-foot O gauge layout.

In the July issue of CTT, I'm sharing my experiences throughout the entire installation process. Since many layout owners have upgraded to the Legacy system, we'll also bring you additional insights and tips from CTT readers with first-hand experience. Kent Johnson

Kent Johnson's Legacy Tip #2

In the July issue of CTT, I'm sharing my experiences throughout the entire installation of Lionel's Legacy system on my 14 x 48-foot O gauge layout. Many other layout owners have upgraded to Legacy and we'll bring you additional insights and tips from CTT readers with first-hand experience. Kent Johnson

Loading Legacy Modules

Bob Keller and Kent Johnson demonstrate how to install the memory module for a Legacy equipped Lionel FEF Union Pacific locomotive into the Legacy remote command base.

Installing TMCC module in Legacy

Bob Keller installs a Lionel Trainmaster generic module into Legacy command control system.

Building a lashup with TMCC and Legacy diesels

CTT's Bob Keller and Kent Johnson build a lashup using Legacy equipped and Trainmaster equipped locomotives.

Operating TMCC and Legacy diesels

CTT's Bob Keller and Kent Johnson operating two locomotives on the same track using only the Legacy controller.

Operating TMCC, Legacy, and DCS diesels

Bob Keller and Kent Johnson demonstrate that you can operate Trainmaster, Legacy, and DCS equipped locomotives at the same time, on the same track.

Legacy at the controls

A video view of Lionel's Legacy Control system on an actual layout.

User Comments

Only registered members of ClassicToyTrains.com are allowed to comment on this article. Registration is FREE and only takes a couple minutes.

Register Today!

ROBERT KELLER from WISCONSIN said:

Craig, we simply had the three command systems plugged in at the same time – Legacy, TMCC, and DCS. A Z-4000 was providing the track power. We thought this was the most direct way to show you could operate each system running trains with their respective command systems at the same time.

Submitted: 6/4/2012 11:38:52 AM (CST)

PAUL LARDNER said:

The "Installing TMCC module in Legacy" video only speaks of lash ups and not the subject. Guess we have a mis-pointed link maybe? Found the Loading Legacy Modules video was very informative.

Submitted: 6/3/2012 1:27:32 PM (CST)

CRAIG R BURTON from VERMONT said:

Very amazing operation of all three systems! Was DCS your base control? What would be more AMAZING is if you could do Conventional with the other three systems as well!! Is the WARP able to handle the situation or would all be LOST??!!?

Submitted: 6/2/2012 5:47:46 AM (CST)

ERIC BRADLEY said:

Very good information and explanation. I just have to save up and get one.
Thanks.

Submitted: 5/16/2012 7:03:20 PM (CST)

JOHN R KELTY from NEBRASKA said:

In response to Stuart, I use a large knife throw switch when I want to go from conventional to TMCC. Works great and is clear to the user what they are doing.

Submitted: 5/9/2012 3:56:46 PM (CST)

Command Control

Lionel Legacy Videos

User Comments